- Telia and Ericsson successfully test a new 5G feature that allows more efficient use of mobile network resources using a 5G smartphone form factor mobile test device powered by Snapdragon® Modem-RF System
- New inactive state enables three times faster access to network resources and reduced battery consumption for smartphone users
- The feature will allow for users to perceive themselves as always connected and a significantly improved experience for smartphone users.
PRESS RELEASE
JUL 14, 2021
5G 5G RAN Innovation #industry-first
Long-term partners Ericsson (NASDAQ:ERIC, news, filings) and Telia have joined forces with Qualcomm Technologies, Inc. to take 5G innovation to a new level by jointly testing a new industry-first feature in Telia’s commercial 5G network. This adds to Telia and Ericsson’s 5G alliance with the purpose to enable better 5G for both smartphone users and advanced and emerging 5G use cases for consumers and enterprises.
This new 5G Standalone* feature – the inactive state of Radio Resource Control (RRC Inactive) – reduces the amount of signaling required during state transitions, making it possible to significantly lower both latency and battery consumption, which are crucial requirements for many Internet of Things (IoT) and 5G use cases, including critical control of remote devices, enhanced mobile broadband, and smart transport.
RRC Inactive was implemented using Ericsson’s software and 5G Standalone network nodes and a test device powered by the Snapdragon X60 Modem-RF System. The companies were able to demonstrate the successful transition between a connected state and inactive state without the device falling back to idle.
The transition to this new inactive state reduces the amount of signaling required during state transitions, significantly lowering latency for the end user, as was seen in this test where the access latency was shortened by up to 3x. This shortened time lag will have a big impact in user experience in applications such as cloud gaming where fast multi-player interactions require 20-30ms end-to-end latency. For an immersive VR gaming experience, the latency and reliability requirements are even more demanding.
Since the shorter latency with this feature makes it possible to reduce the inactivity timer, the partners were also able to see battery savings of up to 30 percent for the modem compared to not activating the feature. While the screen and its associated electronics are the most power-consuming components in a mobile device, implementing the feature will result in a longer battery life for a 5G smart phone user, too.
Stefan Jäverbring, CTO, Telia Company, says: “We’re excited to be able to provide new and enhanced experiences for our customers through our close partnership with Ericsson. Our partnership has enabled this industry- and world-first feature, and this technology milestone is fundamental in making more efficient use of mobile network resources and meeting critical requirements with effective solutions.”
Jenny Lindqvist, Head of Ericsson Northern and Central Europe, says: “We’re proud to jointly with Telia and Qualcomm Technologies demonstrate a world-first innovative solution that will provide a significant boost in 5G benefits for a better mobile experience. This is already a huge milestone in taking 5G technology to the next level, and Radio Resource Control will continue to play a critical role for 5G networks for years to come.”
Enrico Salvatori, Senior Vice President and President, Qualcomm Europe/MEA, Qualcomm Europe, Inc., says: “We are proud to have worked with Ericsson and Telia on bringing this key feature to commercialization. Reduced latency, shorter-time-to-content and increased battery life are high on the must-have lists for users and RRC Inactive helps to deliver them all.”
The development of the inactive state has largely been driven by the growing field of Machine-type Communication (MTC). This is part of 3GPP standardization where Ericsson has had a leading role in defining the functionalities. In most MTC scenarios, the amount of data that wireless devices typically exchange with the network is small and usually not urgent enough to justify the high battery consumption required to handle all the signaling involved in the legacy idle-to-connected transition. For current and future 5G use cases with a large and growing number of devices, improved connection, state, and mobility handling have been identified as key elements of efficient support.
* 5G Standalone (5G SA) is the eventual architecture of 5G networks, increasing efficiency and helping develop new use cases. Many 5G networks have been deployed in Non-standalone (NSA) mode where the underlying 4G network layer supported the necessary signaling. 5G SA removes this 4G dependency. With 5G SA faster network connection times, simpler mobility management and immediate access to wide 5G bands provide an even better user experience.
NOTES TO EDITORS:
Related links:
Meet 5G latency requirements with inactive state – Ericsson
Ericsson 5G Standalone solutions
FOLLOW US:
Subscribe to Ericsson press releases here.
www.twitter.com/ericsson
www.facebook.com/ericsson
www.linkedin.com/company/ericsson
MORE INFORMATION AT:
Ericsson Newsroom
media.relations@ericsson.com (+46 10 719 69 92)
investor.relations@ericsson.com (+46 10 719 00 00)
ABOUT ERICSSON:
Ericsson enables communications service providers to capture the full value of connectivity. The company’s portfolio spans Networks, Digital Services, Managed Services, and Emerging Business and is designed to help our customers go digital, increase efficiency and find new revenue streams. Ericsson’s investments in innovation have delivered the benefits of telephony and mobile broadband to billions of people around the world. The Ericsson stock is listed on Nasdaq Stockholm and on Nasdaq New York. www.ericsson.com
PR Archives: Latest, By Company, By Date